answersLogoWhite

0

Checking the spark gap on spark plugs, and other small clearances

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you measure cylinder head warpage?

With a straight edge and feeler gauges.


What type of measuring tool is used to check valve clearance?

Feeler gauges.


How do you calibrate feeler gauges?

a feeler guage cannot be calibrated, it is made at precise measurements that cannot be changed. When a feeler guage is out of spec, it is replaced.


Nonmetallic feeler gauges are used to measure?

Nonmetallic feeler gauges are used by technicians to measure the air gap that exists between the coil body and the armature on an electro-magnetic brake. This type of braking system generally can be found on industrial cranes and on marine davit hoist systems.


What four examples of industrial uses?

feeler ka


Feeler gauges are used to measure?

Feeler gauges are used to measure the clearance between two object surfaces, typically in small increments. They are commonly used in engineering and automotive applications to ensure precise fits and tolerances.


IS standards calibration for feeler gauge?

Yes, it is important to calibrate feeler gauges to ensure accurate measurements. Calibration involves comparing the gauge readings to a known standard and adjusting as needed to minimize errors. Regular calibration helps maintain the accuracy and reliability of the feeler gauge for precise measurements.


What does dwell mean for a 64 Chevy?

An electronic way of setting the gap in ignition points. This is more accurate than using feeler gauges.


What is the clearance for a valve adjustment using a feeler gauge for a stock Chevy 350 motor?

Stock 350's have hydraulic lifters, so feeler gauges aren't needed. Get yourself a Chilton's manual or similar and read up on the valve adjustment process.


What can you use if you do not have 0.005 filler gauge?

If you're asking about feeler gauges, then a pair of 0.002 plus an 0.001 would do, but make sure they are very clean and undamaged.


Where are some screw gauge uses in real life?

Most common is fuel gauges in power equipment. The gauge is in the fuel cap


How do you gap the piston rings on a 86 cutlass?

You will need feeler gauges, a ring spacer and separation tool, the correct specs for their correct placement on the piston and the gap specs.