If the cruise control is not working on a 1993 Villager GS with 199,000 miles, the problem could be the MAP sensor. It could also be an oxygen sensor that is bad. There is also a possibility that the unit's main fuse is blown.
The cruise control module of a 1993 Mercury Villager is located under the passenger side of the dashboard.
The cruise control computer module is located on the passenger's side of the engine compartment on a 1993 Mercury Villager.
It attaches to throttle plate (next to throttle cable) to cruise control unit.
2004 sebring convertable cruise control not working - what to do?
On the brake pedal.
cruise control does not work when headlights are on
the cruise control is broken....
Check 15 amp fuse "R" in the fuse box. It appears that the horn relay feeds part of the cruise control system.
Start with checking the fuse.
Are you sure you need the fuse for the cruise control. My cruise control wasn't working, neither were my brake lights. All 7 bulbs were burnt out. When the brake lights were replaced the cruise control worked.
cruise control not working,u need to check the fuses also check the clutch safety switch as this also has to do with cruise control
My 2002 Olsmobile Intrique cruise control works some times when you set it, why?