WikiAnswers cannot show diagrams or pictures.
No
Need to know your engine size in order to anwer your thermostat problems.
197 degrees Fahrenheit , according to fordparts.com
The spring side of the thermostat is towards the engine and the vent hole is at the top ( if that's what you are asking )
Drain the water from your radiator. Remove the radiator hose, from the thermostat housing. Remove the thermostat housing retaining bolts. Replace the thermostat housing gasket and reverse the process to install the new thermostat.
Follow the top radiator hose from the radiator , it connects to a metal pipe , the other end of the metal pipe is permanently attached to the thermostat housing that is bolted to the front of the engine . The thermostat is inside the thermostat housing
Check the water pump
Follow the top radiator hose from the radiator , it connects to a metal pipe , the other end of the metal pipe is permanently attached to the thermostat housing that is bolted to the front of the engine The thermostat is inside the thermostat housing
Haynes Repair Manuel. Local auto parts store.
follow the top radiator hose to the engine. that is where your thermostat is. you will have to drain the radiator, remove the engine side of the hose and remove the thermostat housing to access it. remove thermostat clean mating surface of housing and engine, install thermostat, install housing, secure radiator hose, fill with coolant. start engine and check for leaks.
92 & 93 ford explorer fuse box diagrams, need to find air condition fuse or relay? no power to the compressor?
Follow the upper radiator hose from the radiator to the engine. Where it meets the engine there is the thermostat in the housing. Make sure you install the spring TOWARD the engine when replacing it. GoodluckJOe