I pull the hand brake 1 teeth which hopefully has no effect on engaging the worn brakes on rear drums of the car. Of course brake lights turns on on the dash panel. Hope that someone comes up with better answer.
To fix the daytime running lights on a 1996 Geo Metro LSi, first, check the fuse associated with the daytime running lights system in the fuse box; replace it if it's blown. Next, inspect the bulbs to ensure they are functioning properly. If both the fuse and bulbs are fine, examine the relay and wiring for any damage or corrosion. If issues persist, consider consulting a professional mechanic for further diagnosis.
In a 2001 Chevy Metro, the relay for the daytime running lights (DRL) is typically located in the fuse box under the hood. You can find the fuse box near the battery, and the relay should be labeled for easy identification. If you’re having trouble locating it, refer to the owner's manual for a diagram that shows the exact position of the DRL relay.
In my case, when turning the lights on, the daytime lights turn off, but the taillamps still on. I found that the steering wheel combo switch (turning lights/windshield switch) connector (the clear color one, was excesive hot and the plastic melt. I changed the connector by a junkyard one and it worked. I guess if you don't have one handy, you'll need to fix your old one.
Answerthis is what you need to know if I have just discovered this same problem in my mother's 96 Metro The daytime running lights work ok, but as soon as you put the lights on, the daytime running lights cut out and all you are left with are the parking lights. In addition the brights work when you pull the stick towards you, but will not stay on when you puh the stick forward to leave them on. I removed the whole fuse block from under the dash and discovered one burnt out terminal on the under side. All of the other terminals in the block are nice and clean looking except for this one that is dicolored with burnt plastic around it. My advice would be to replace the fuse block and possibly the connector that plugs into it.http://geometroforum.com/topic/2575236/1/#new
In the few rare cases that you would need the lights off while engine on, you can lift the parking brake one click. It won't engage the brake but will cut the lights. If you mean the headlights, this is a safety feature of the Chevrolet and many other cars and should remain intact. There is no switch to throw to shut these off.
first metro train run in delhi at 24th december 2002
I would start with replacing the head light switch
Usually electricity.
Most auto parts stores have wiring diagrams for a 97 Geo Metro. This includes wiring diagrams for the brake light, head lights, and much more.
One can find lyrics to Lights On by going to the Metro Lyrics website. The website has the lyrics to a large database of songs, including the song Lights On.
Check that your hand brake is all the way down. If your hand brake switch is tripped, the brake lihgt should come on, and the automatic running lights won't.
Turn signal flasher?