The Ford E-350 and F-350 do not use the same frame. The E-350 is a van built on a platform designed for passenger and cargo transport, while the F-350 is a heavy-duty pickup truck with a chassis designed for towing and hauling. Although they share some components and are both part of Ford's commercial vehicle lineup, their frames are specifically engineered for their distinct purposes.
The E350 is based on the F350 pickup truck chassis. The E250 is based on the F250 chassis. The payload of the E350 is several hundred pounds greater than the E250. If this information is critical to your desired use, you should consult your local Ford truck dealer for details.
Converting a 1986 E350 frame to function as a 1989 F250 4x4 frame is not straightforward due to significant differences in design and specifications between the two models. The E350 is a van chassis, while the F250 is a truck chassis, leading to variations in dimensions, suspension, and drivetrain compatibility. While some parts may be interchangeable, extensive modifications would be necessary, and it may not be the most practical or cost-effective solution. It's advisable to consider using an F250 frame directly for a more reliable and efficient build.
mercon, not merconV matters not if its auto or manual. They all use the same
It's not really clear what you are asking about. But you can use the same components even if the material of the frame is different. Basically you can use the same parts in a steel frame as you would in an aluminum frame - assuming the physical fit is the same.
The book on my 1998 Ford E350 says to use 5W-30.
No, different frame.
Use 10-30
Your answer is NO... The F550 & F450 use a 10 bolt patern and the F250 & F350 use an 8 bolt patern.
measure your wheelbase, find a 4x4 with the same length, use it's frame and suspension I've herd a f150 frame will work
When you want to group several controls together - name and address, for example - you use a Frame. The frame backcolor can be the same as the form's and only the frame borders will be obvious, or it can be a different color and stand out.You create the frame before the controls. When you create controls in a frame, they are tied to the frame and move with it. The frame caption is the text that appears at the top of the frame - you use it to define the group.
premium gas
All you have to do is right click on the frame and choose delete. I use Pivot 2.2.6. I do not know about the other versions, but it is probably the same