you should only have to take loose the heater hoses where they go into the firewall and of course the heater core itself
A "heater" or a "heater core"?
detach it from the batter ...
Buy a Toyota
To replace the alternator on a 1996 Honda Passport, first, disconnect the negative battery cable to ensure safety. Next, remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its bracket. Disconnect the electrical connectors and the power wire, then remove the alternator from the engine bay. Install the new alternator by reversing these steps, ensuring all connections are secure and the belt is properly tensioned.
WE DON'T KNOW!
The heater in the CRV Honda is not working . How do I fix this
To replace the clock light bulbs in a 2000 Honda Passport, first, disconnect the negative battery terminal for safety. Remove the trim panel around the dashboard clock by gently prying it off. Unscrew the clock assembly to access the bulbs, then carefully twist and remove the old bulbs. Replace them with new ones, reassemble the clock, and reconnect the battery.
replace it
To replace the alternator on a 1996 Honda Passport, first disconnect the negative battery cable and remove any components obstructing access to the alternator, such as the air intake hose. Then, loosen the serpentine belt tensioner and remove the belt from the alternator. Unbolt the alternator from its mount, disconnect the electrical connectors, and remove the old alternator. Install the new alternator by reversing these steps, ensuring all connections are secure and the serpentine belt is properly tensioned.
To replace the windshield washer fluid tank and pump on a 2001 Honda Passport, first, disconnect the battery and drain any remaining washer fluid from the tank. Remove the bolts securing the tank, disconnect the pump wiring harness and hoses, then take out the old tank. Install the new tank by reversing the process: connect the pump, secure it with bolts, refill with washer fluid, and reconnect the battery.
They just bolt onto a bracket, you just have to disconnect the wire after disconnecting batt and can do with a few handtools, but must remove the belt. That is easier if you can round up a helper
Replace Thermostat