0
What else can I help you with?
How do you put in thermostat on 99 dodge caravan?
Follow the upper radiator hose to where it meets the engine. Remove the two bolts of the thermostat housing and remove and replace the thermostat.
How do you replace a thermostat in a 2000 dodge neon?
Drain the radiator. Remove the radiator hose. Remove the inlet from the engine. The thermostat is in the inlet. Replace the inlet and the gasket, and reverse the procedure to finish the procedure.
Do you have to remove the alternator to replace the thermostat in a Dodge Durango?
you shouldn't just follow your coolant hose
How do you replace the serpentine belt on a 2004 dodge ram 2500 turbo cummins diesel?
You can remove the old serpentine belt on your 2004 Dodge Ram by loosening the tensioner pulley. Put the new serpentine belt on and tighten it with the tensioner pulley.
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
How to replace the thermostat on 2005 Dodge Magnum?
To replace the thermostat on a 2005 Dodge Magnum, start by ensuring the engine is cool and disconnect the battery. Drain the coolant and remove the upper radiator hose from the thermostat housing. Unbolt the thermostat housing, remove the old thermostat, and clean the mating surfaces. Install the new thermostat, reattach the housing, reconnect the hose, refill the coolant, and reconnect the battery.
How do you replace the thermostat on a dodge magnum 3.5L?
It is at the end of the lower radiator hose on the motor. You will have to empty the radiator and remove the housing to replace it.
How do you replace thermostat 2000 dodge Dakota 3.9?
Drain the radiator. disconnect the top radiator hose from the engine. Remove the water inlet that the hose was hooked to. The thermostat is in the housing. Replace the gasket when replacing the thermostat.
How do you replace a thermostate in a 2003 Dodge Neon?
To replace the thermostat in a 2003 Dodge Neon, first, disconnect the negative battery terminal and drain the coolant from the radiator. Remove the upper radiator hose connected to the thermostat housing, then unbolt and remove the thermostat housing to access the thermostat. Replace the old thermostat with the new one, ensuring the gasket is properly seated, then reassemble everything by reversing the steps, refill the coolant, and reconnect the battery. Finally, start the engine and check for leaks.
How do you replace a serpentine belt on a 2000 dodge neon?
Take the passenger side tire off and remove the splash guards... should be easy from there
How do you replace the thermostat located on a 1998 Dodge Durango?
located at the end of the upper radiator hose. remove two bolts, replace with new parts remember to replace the gasket.
How do you replace MAIN belt on a 2001 dodge stratus v6?
remove the right hand side wheel and fender liner to access the serpentine belt
