No, you can cant the engine forward to gain access to the pump.
Everything should bolt right up.
To replace the power steering seals in a 2004 Pontiac Grand Prix, first, safely lift the vehicle and remove the power steering pump from the engine. Drain the power steering fluid, then disassemble the pump to access the seals. Replace the old seals with new ones, ensuring they are properly seated, and reassemble the pump before reinstalling it. Finally, refill the power steering fluid and check for leaks while turning the steering wheel to circulate the fluid.
At the power steering pump reservoir. The power steering pump or reservoir is located on the left side of the engine between the engine and the firewall
NO.
It is on the left side of the engine back by the firewall.
what size engine
how to replace the power steering hose on a 2001 oldsmobile aurora 3.5 liter engine
I already answered this under spark plugs. If you cannot find it let me know david vol-dolfan@msn.com
Since it's in the car, perhaps the easiest way is to get the casting code off the engine. It will be located back by the distributor. There are several online sites that have the casting codes for a Pontiac engine.
1996 2.4L Pontiac Grand AmWhat year, engine, model?
Without knowing what kind of car and what engine, there is no answer.
Probably at the power steering pump. You will find that at the side of the engine that has your drive belts, most likely at the passenger's side and toward the back and top of the engine.