0
What else can I help you with?
Can i use ox-38 in car as engine oil?
No, not unless you want to destroy your engine.
How much oil to fill a big truck engine?
38 - 46 quarts, depending on what the engine is.
How may quart of oil does an 18 wheeler use?
38 to 46, typically. Depends on the engine.
What type of oil does a john deere stx - 38 mower use?
10w40 for the engine and hy-gard for the transmission.
Where is the oil filter located on a 2003 BMW Z4?
Top front of the engine, located in a canister that has a big (38 mm or 36 mm) hex molded into the top. Using a socket on this hex head, the top screws off.
What is the oil capacity of a cummins n14 engine?
The oil capacity of a Cummins N14 engine typically ranges from 34 to 38 quarts (approximately 32 to 36 liters), depending on the specific model and configuration. It's important to consult the engine's manual for the exact specifications and requirements, as variations can occur based on factors like the oil filter and oil cooler. Regular maintenance and proper oil levels are crucial for optimal engine performance.
What oil should you use in a Briggs and Stratton Quattro 38 lawnmower is it a 2 stroke or 4 stroke engine?
4 stroke engine. Use 5W-30 synthetic engine oil at any temperature range Use 30W or 10W-30 above 40 degrees
What are the release dates for Motorweek - 1987 Dodge Avenger 26-38?
Motorweek - 1987 Dodge Avenger 26-38 was released on: USA: 25 May 2007
What are the release dates for Motorweek - 1987 Dodge Challenger 27-38?
Motorweek - 1987 Dodge Challenger 27-38 was released on: USA: 23 May 2008
How many Dodge Chargers were made in 1970?
38
How do you drain the oil from JD STX 38?
To drain the oil from a John Deere STX 38 lawn tractor, first ensure the engine is cool and then tilt the tractor on its side with the carburetor facing up to prevent fuel leakage. Locate the oil drain plug, typically found at the bottom of the engine, and use a wrench to remove it. Allow the old oil to fully drain into a suitable container, then replace the drain plug securely before refilling with fresh oil. Always check the owner's manual for specific instructions and recommended oil types.
What is the oil pressure psi on 1999 Harley FLHTC Twin CAM 1450?
Harley-Davidson Oil Pressure Specs for the Twin Cam Engine: Cold engine start-up: 44-50 psi. Warm engine at 2000 rpm and up: 30-38 psi. Warm engine at idle: at least 10 psi.
