0
What else can I help you with?
What would cause the serpentine belt of a 1999 Dodge Grand Caravan to keep slipping off the pulleys?
One of the pulleys is out of alignment,usually it is the tension pully. Replace it and problem will go away.
How do you adjust the tensioner on a 2000 Dodge Grand Caravan?
You cannot adjust the belt tension on a 2000 dodge grand caravan. This vehicle is equipped with an automatic tensioner. If tensioner is frozen or will not hold the belt tight, it must be replaced.
Can you tighten the serpentine belt on a 2000 dodge caravan?
You can do that by replacing the tensioner
Dodge Caravan clicking noise?
drive belts tensioner/under chassis
How do you adjust serpentine belt tensioner to install a new belt on a 1988 dodge caravan?
The belt tensioner is self-adjusting.
How do you fix a dodge spirit belt?
To fix a Dodge Spirit belt, first, ensure the vehicle is off and safely raised. Inspect the belt for any signs of wear or damage; if it’s frayed or cracked, it should be replaced. If it’s loose, check the tensioner and pulleys for proper alignment and function. Lastly, adjust the tensioner or replace it if necessary, then reinstall the new or repaired belt, ensuring it is properly aligned on all pulleys.
How do i adjust the belt tensioner on a 2000 dodge caravan?
To adjust the belt tensioner on a 2000 Dodge Caravan, first, locate the tensioner pulley. Use a wrench or socket on the tensioner bolt to rotate the tensioner away from the belt, which will relieve tension. While holding the tensioner in place, you can adjust or replace the serpentine belt as needed. Release the tensioner slowly to reapply tension to the belt once adjustments are complete.
Where is the tensioner pulley on Dodge Caravan 98?
its on the left side. its the easyest pully to see.
How do you get the belt tensioner to move on a 1995 Dodge Grand Caravan?
Pull on the belt and you can see how the tensioner moves. Put a wrench on the bolt.
Can you do a rear end alignment on a 2007 dodge grand caravan?
A proper alignment shop can do it, it takes special equipment.
How common is a rear wheel alignment on a dodge caravan?
When I took my 96 Caravan to be aligned they said there is no rear adjustment that can be done.
How do you change the serpentine belt on a 1991 dodge stealth?
To change the serpentine belt on a 1991 Dodge Stealth, first, ensure the engine is off and cool. Locate the belt tensioner and use a wrench to relieve tension on the belt, allowing you to remove it from the pulleys. Note the belt routing or refer to a diagram for proper installation, then place the new belt onto the pulleys and release the tensioner to secure it. Finally, double-check the belt alignment before starting the engine.
