A 1999 Chevy van may have difficulty starting if the flywheel is damaged, as the flywheel is essential for engaging the starter motor. If the damage prevents the teeth from properly engaging, the engine may not crank or may make grinding noises when attempting to start. In some cases, the van might start intermittently, but it’s advisable to address the flywheel issue to avoid further damage. Consulting a mechanic for a thorough inspection is recommended.
no, different trans and size of flywheel
------- 1/19/09 --------- Greetings, which size engine do you have?
How do you remove the flywheel on a 1999 ford ranger
55ftlbs flywheel to crank
It is located on the bottom of the block, back at the far edge of it where it can engage the flywheel. It sits along side the block below the right exhaust manifold.
Connected to the flywheel housing.
The flywheel has kinectic energy that keeps the engine turningbetween firing strokes.
1999 surbaban
305 Stock to flywheel.
Look on the bottom by the flywheel.
The flywheel typically isn't a service item. If for some reason you did actually have to replace it you would have to do so by dropping the transmission, and all associated bracing, and then removing the bolts securing it to crank. Normally these bolts are secured by triple digit torque figures, so an impact gun is necessary. Removing and installing the flywheel is straight forward, the real issue is actually getting to it.
No, not unless you use to much.