answersLogoWhite

0

You can remove it and clean the filter inside it or you can replace it.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is the black box behind your fuel tank in a 2003 Chevy S10 4x4?

The EVAP Charcoal canister.


Where is evap canister located on a 1996 Chevy s10 blazer?

Where is evap canister located on a 1996 chevy s10 blazer? It should be found above the rear axle on the drivers side, mounted to the inside of the frame rail.


What is the plastic box under the rear of the S10 trucks function?

EVAP charcoal canister.


You want to see a diagram of a evap canister on a 97 s10?

Your Chevy1997 S-10 came with an owners manual when you purchased it. If you look in it, you should find a diagram of an evap canister. This will help you navigate things easier.


Where is the evap canister located on 1998 Chevy s10?

Above the rear axle on the drivers side. Remove the left rear tire to help gain access to it.


Where is the evap canister located on a 1997 Chevy s10?

mine is under the bed towards the back of the frame. its a black box with a hose going to a sensor, and another to your gas tank.


What does code p0442 mean on a chevy s10 2.2l?

You have a small EVAP leak, possibly a loose or faulty fuel cap.


Where is the evap vent solenoid on an 2001 S10 4.3?

There are 2 I believe. One is above the rear end mounted to the bed. The other I believe is mounted to the canister just a bit towards the drivers side rear wheel on the inside of the frame not to far from the other evap


How do you fix evap on s10 truck?

To fix the EVAP (Evaporative Emission Control System) on a 2010 S10 truck, first, use an OBD-II scanner to identify any trouble codes related to the EVAP system. Common fixes may involve replacing a faulty gas cap, repairing or replacing cracked hoses, or fixing the purge valve. Additionally, check the EVAP canister for blockages or damage. After repairs, clear the codes and take the vehicle for a drive to ensure the system is functioning properly.


1996 Chevy Blazer with an evap control system code possibilities on problem?

i think about every s10 blazer has had this problem,lol this is very common. Usaull problems are evap canister or tank vent port leaking, your computer can detect 1\16 of an inch of a leak, The cheapest thing is to check your gascap for a leak, if you let your vehicle run with the gas cap off, like getting gas for example that could have set that code off.


What makes your 1995 s10 run very bad while driving?

The S10's were notorious for having fuel line leaks under the plenim. Either the fuel line nut kit or the FPR fuel pressure regulator. That would be the first area to check. The side of the plenim that is clean, will be the side that is leaking. Of course it could be a sensor such as an EGR or IAC, but our S10's have the common problem of fuel leaking internally making them run rich and poorly, using too much fuel.


Is there a breather tank next to the gas tank on Chevy s10?

No, fuel vapors not vented to atmosphere. It may be the filter or charcoal canister. Usually fumes stored in a canister & then run through the engine for emissions reasons.