8 x 6.5
what are the wheel alignment specs for 1998 ford explorer
Alignment rack, need 4 wheel alignment done
wheelalighnment spec 2008 ford terittory ghia
Where is the computer located in the 1995 ford e250 4.9l engine
The 2001 Ford E-250 typically has five lug nuts per wheel. This is standard for many full-size vans and trucks from that era. Always refer to the owner's manual or check the vehicle specifications for confirmation, especially if modifications have been made.
For a 1963 Ford Fairlane, the front end alignment specifications typically include a toe setting of 1/16 inch to 1/8 inch toe-in, a camber of 0 to -1 degree, and a caster angle of +1 to +3 degrees. It's essential to ensure that the steering wheel is centered during the alignment process. Always refer to a service manual for the most accurate specifications, as they may vary slightly based on the model and configuration. Regular alignment checks can help maintain handling and tire wear.
The height of a 2012 Ford E250 van is approximately 82.7 inches, or about 6 feet 10 inches. This measurement may vary slightly depending on specific configurations and options. Always check the owner's manual or manufacturer's specifications for precise details.
the ford ranger does need a four wheel alignment over time. As anything else wear and tear will take effect and things shift and move. I suggest doing an alignment at every purchase of tires. Newer models of Ford Rangers call for a caster and camber bolts. There is no way to align the vehicle without them. I have purchased these kits from 30-12- bucks for each alignment
front end alignment
Below and to the left of the steering wheel , by the brake pedal Remove panel cover to access the fuses
where do you find horn fuse on 1993 e250 ford van