Ford Mondeo mk3 how to replace speedo bulbs?

Answer 1

Hi to replace the speedo bulbs. 1 remove lower pannel. 2 unscrew and remove the case from the steering columb (top only) Once removed you will see 2xscrews they are torx bits. remove them. Look inside where you have removed the top columb cover and you will see 2 more screws to the side of the steering. they are set back so you will need a long reach tool (screw driver). Remove them. Then you have to give the dash pod a good tug to get it out. On the rear of the pod there is a plug to remove this you have to pull a small lever upwards to release to plug. The bulbs are the same as in most front side lamps. The capless type. Chris