I'm not a mechanic / technician but the brake light comes on if the parking brake is applied or if the brake fliud level in the brake master cylinder in your engine compartment is low
The process for applying parking line paint in a parking lot involves cleaning the surface, measuring and marking the lines, using a striping machine to apply the paint, and allowing it to dry before reopening the area for use.
parking?
Faulty or over sensitive parking brake switch or sensor.,
When you put the car in park your applying the parking break. this always happens when you place it in park unless the linkage is shot then you can't even remove it from park
An example of a force being applied but nothing happening is pushing a broken-down car that has its parking brake engaged. Despite applying a force to move the car, it remains stationary due to the resistance of the parking brake.
Brake rotors or drums need to be machined or replaced. If it causes steering wheel shaking, check front brakes. If happens when applying parking brake look to rear brake problem.
Lock up the rear wheels, lose grip/traction and then probably crash (or at least lose control in the skid) Depending on the vehicle, some vehicles have a parking brake that doesn't have much effect trying to stop a vehicle especially at that speed. Applying a parking brake at that speed would probably cause the parking brake to disintegrate in a moment.
parck your car
Try applying parking brake
they give you a fine
Applying the parking break works for me.
You are allowed to park in handicapped parking spaces.