Newer (post 1993) A/C systems using the current 134a refrigerant need a low side pressure of 35 to 45 psi, and a high side of roughly the outside air temperature plus 100. Say it's 95 degrees outside as it is today - then a high side pressure of 195 psi is about right. Use gloves and safety goggles for the event that something lets go in oyour face. IT happens! Be safe - or go have a pro do it for you. Newer (post 1993) A/C systems using the current 134a refrigerant need a low side pressure of 35 to 45 psi, and a high side of roughly the outside air temperature plus 100. Say it's 95 degrees outside as it is today - then a high side pressure of 195 psi is about right. Use gloves and safety goggles for the event that something lets go in oyour face. IT happens! Be safe - or go have a pro do it for you.
American High - 2000 Pressure High 1-4 was released on: USA: 9 August 2000
The high pressure AC switch on a 2002 Chrysler Sebring is located on the passenger side of the engine bay. It is paired with the low pressure hose and is mounted near the coolant and power steering reservoirs.
How do you remove high pressure power steering hose 2000 odlsmobile intrigue
A high pressure systems has a high pressure center.
You need to check the oil pressure with a mechanical gauge.
High pressure = High temperature
Defective Blower Motor Resistor Pack.
its blowdown, at high pressure
lpg is high pressure.
Wind moves from high pressure to low pressure. Air always moves from areas of high pressure to areas of low pressure in an attempt to equalize pressure differences.
No , a high temperature high pressure ( gas )
it means high pressure