There is a test fitting on the fuel line and it should have at least 35#
Where is the tap located exactly I can't find mine.
The 2.4L DOHC engine has none. I got a fuel line from a parts car and the end of the fat metal fuel line from the car.(fat one is the supply line) 3 hose clamps, cut the rubber line in the middle,put my guage in the middle and the short metal piece on the end that plugs into the exsisting rubber fuel rail line. In short words,I had 2 fuel lines,one with a guage in it.After pressure check,remove the rigged up line and connect the exsisting line back like it was.
Your 1996 Chevrolet Cavalier 2.2 liter engine oil pressure should be approximately 40 psi. A range of 35 to 45 psi is acceptable.
Chevy Cavalier should run about 195F or 91C
i think between 30 to 60
It is written on the side of the tire in small print. Probley 32 to 35 LBS.
The 2001 Chevy Cavalier 2.2 liter engine cylinder head bolt?ætorque specification is 120 pounds. The cylinder head bolts should be torqued in 40 pound intervals.
A 1993 Chevy Cavalier typically requires a fuel pressure of around 35-45 psi (pounds per square inch) for proper operation. This pressure is necessary for the fuel injection system to function correctly and ensure optimal engine performance. If you're experiencing issues, it's advisable to check the fuel pressure with a gauge to confirm it's within this range.
As long as it is the same displacement. Liters/cid. It should
147 foot pounds
Check your fuel pressure first then go from there.
on the block under the intake
Yes it should. cavalier/corsica 90-95; most parts will be interchangeable.
The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.