The way I removed my manual trans was to start at the rear end. Pull the rear drive shaft, pull the front drive shaft, un bolt the transfer case from the transmission, support the transmission with a jack, pull the trans cross-member, pull the exhaust y-pipe, un-bolt trans from motor and there you have it.
you sell the truck
No it will not, There is not enough room for it to fit. A car transmission is alot smaller then a truck transmission.
Need to know if it is a truck or car and if it is a standard or automatic transmission.
Depends on the model of the truck
It is in the bottom of the transmission. You will have to remove transmission pan and you will see it.
No, You must remove the transmission pan to drain the fluid.
Mercon works fine.
i have a 1967 chevy c10 truck. i want to know what 5 or 6 speed manual transmission will bolt up to the original 327?
Is there a manual to rebuild a 350 turbo transmission on a 1977 Chevy Truck on line that I can order or down load for free I think if you got to Chevy truck parts .com you can find one
Yes you can if you have all the parts to make it work from another truck.
Need more info, manual steering gear box, power steering gear box, 3 speed standard transmission box, or 4 speed transmission box? The truck has a 3 speed manual transmission and power steering gear box thanks The steering gear box will interchange.
Yes they are mounted on the valve body that's up in the transmission. You will have to remove the transmission pan to service them.