I had the same problem and it was dirty sensors on the back bumper. There are two little round sensors on the rear bumper. Clean with a damp soft cloth, dry off and see if this helps.
press a button
Yes, if it is exactly 180° out.
I believe that is for your reverse sensing system The system is normally on , but if the engine is running , reverse is selected , and the button is pushed , that turns off the reverse sensing system and the indicator will light displaying OFF
Do you mean the switch on the dash to the left of the steering wheel that shows OFF at the top and a " P " and small triangle at the bottom ? That is the switch to shut off the reverse sensing system ( park assist ) You can only shut off the reverse sensing system when the ignition is on and the gear selector is in reverse
That's your OFF button for your ( Reverse Sensing System , RSS ) You can view the 2000 Ford Explorer owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( page 33 shows the Reverse Sensing System )
According to the Owner Guide that is the button for the ( reverse sensing system )
The development of ground-penetrating radar has been of great assistance to archaeologists, as well as geologists.
On a 2005 Ford 500, the reverse sensing system module is typically located in the rear of the vehicle, often near the rear bumper area. It is usually mounted to the body structure or on the rear crossmember. To access it, you may need to remove the bumper cover or specific trim panels. Always consult the vehicle's service manual for precise location details and removal instructions.
There is a switch for the reverse sensing system located on the dash just to the right of the instrument panel dimmer control. When the ignition is on and the gear selector is in reverse, this switch can be used to disable or enable the RSS . If the system has been disabled the off indicator remains illuminated, so press the switch again when the ignition is on, and the gear selector is in reverse to return the system to the ON position.
remote sensing
Sensing Murder was created in 2003.
The duration of Sensing Murder is 1.5 hours.