With a scan tool.
With a scan tool.
The airbag computer has detected a malfunction and set a code.
The airbag light comes on at start up for a bulb check. It stays on when the computer detects a malfunction and sets a code.
You have it checked for codes, and have the cause of the code repaired.
The airbag computer has detected a malfunction and set a code.
Have the code read, repair the cause, and clear the code with a scan tool.
There are many ways to retrieve a code once you have found it. However without knowing where the code came from, it is hard to answer how to retrieve it.
The anti-theft code for a 1999 Acura CL is typically a unique four-digit code that is specific to each vehicle. To retrieve this code, you can check the owner's manual, look for a card in the glove compartment, or contact a local Acura dealership with your Vehicle Identification Number (VIN). If you can't find the code, the dealership can help you reset or retrieve it.
Fault code B1422 in a Mercedes CLK320 1999 typically indicates an issue with the driver's side airbag sensor. It may be caused by a faulty sensor, wiring problem, or a defective airbag module. It is recommended to have the vehicle diagnosed and repaired by a qualified technician to ensure proper functioning of the airbag system.
Trouble code P0320 means: Ignition/Distributor Engine Speed Input Circuit
there is a "wallet card" which has the code on it, if you do not have this card you will need to bring the car into a Mercury dealer and they will "plug it in" and retrieve the factory preset code.
If the cause of the code was fixed the light would have gone off on its own.
The light is on because the air bag computer has detected a malfunction and set a code. The failure will have to be repaired to get the light off.