the wire is bad and you should be experiencing performance or engine missing or shaking the wire could also be installed wrong
1993 Ford Escort 1.9 Liter Engine Spark Plug to Distributor Cap Wire Order: Looking at the engine from the front of the car, the distributor cap is to the right of the engine (or on the driver's side of the car looking from the front of the car. The spark plug wires come from each spark plug and terminate on the distributor cap. They plug in to the distributor cap. Looking at the engine from the front of the car, the spark plugs (left to right) are identified as spark plug "A", spark plug "B", spark plug "C" and spark plug "D". "A" wire comes from the "A" spark plug to the 4th (right most) hole on the distributor cap; "B" wire comes from the "B" spark plug to the 3rd (2nd right most) hole on the distributor cap; "C" wire comes from the "C" spark plug to the 2nd (left most) hole on the distributor cap and the "D" wire comes from the "D" spark plug to the left most hole on the distributor cap.
The number on spark plug is the one closest to the front of the engine. (The front is the side with the belts.)
On the inline six cylinder engine , spark plug # 6 is the rear spark plug On the V6 engine , spark plug # 6 is the rear plug on the drivers side of the engine On the V8 engines , spark plug # 6 is the 2nd plug from the front on the drivers side of the engine
If it's a V6 then it is in the right head by the back spark plug. ............V8..................................................... Front spark plug. This is you standing in the front of engine.
The 1979 Honda motorcycle spark plug gap is .013. Most spark plugs will come pre-gapped from the spark plug manufacturer.
valve cover and spark plug tube gaskets. they come together in a kit
The spark plug gap, on your 1994 Honda, is .013. Most spark plugs will come pre-gapped from the spark plug manufacturer.
The 1981 Honda 200 spark plug gap is .023. Most spark plugs will come pre-gapped from the spark plug manufacturer.
The 1979 Suzuki 750 spark plug gap is .018. Most spark plugs will come pre-gapped from the spark plug manufacturer.
AnswerThey are inside the valve cover. Looking from the front of the car you will see the spark plug wires routing from the distributor cap to each plug. To change the plugs remove the spark plug wire and use a spark plug socket attached to an extension. I recommend adding some duct tape to the socket/extension connection to prevent the socket from coming off in the valve cover.
If you are standing in front of the car, your number 1 spark plug is the first plug on the left in the front of the car. Number 2 is the first plug on the right. 3rd plug is the second one on the left and so on.
Check the Vehicle Emissions Control Information ( VECI ) decal in the front of your engine compartment ( it will show the type of spark plug to use and the spark plug gap )