answersLogoWhite

0

there is a small valve in between the two tanks on the gas line. when you replace a pump some times they will blow out. it is a small 3 way fitting that keeps the flow in the right directions. it is cheap and easy to fix.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

What could cause only the left front disc brake assembly to drag?

The caliper could be hanging up. Or your right front brake line could be coming apart or kinked. that will cause it to pull left.


What could cause the oil to run out the front end of Mark8 when started?

Front engine seal?


I have a roar in my front wheel. What could it be?

A roar in the front tire could mean that a tread has separated. This is a serious condition and can cause an accident. This should be checked by an expert and changed immediately. A bad wheel bearing could also cause that. Have it checked.


Can the front axles cause a vibration in the front end?

Yes, the wheel bearings or CV joint could be bad.


How do you use stationary front in a sentnce?

today the stationary front could not move each outer cause they had the ammeter in it.


What could cause a Left front popping noise in 98 Chevy blazer?

A front popping on the left of a 98 Blazer could be the brakes, steering, or wheel bearing. Check all three to find the cause.


What could cause a squeaky front end?

BAD BALL JOINTS instuctions


What will cause Front tire to lean out?

The cause of the front tire leaning out comes from needing new ball bearings. It could also mean you need wheel bearings.


Will a front end collision cause a blown head gasket?

It could lead to it indirectly, but it won't be a direct cause.


What could cause a noise in front end when wheel is turned all the way?

Could be bad ball joints.


What could cause the front tire to click as you turn on the 2006 Chevy Malibu?

bearings


After changing pads and master-cylinder front brakes are trying to lockup on a 1988 Surburban 4x4 What should be done next?

Check the calipers. If the calipers pistons are extended to far - this could cause the brakes to lock up. The pistons cannot be retracted.