0
I believe that it is a planetary transfer case with an internal clutch pack, that delivers 30% of the engine torque to the front wheels, allowing for slip for cornering. When the van is driving normally, the planetary gears rotate as a unit but if the rear wheels start to slip, the planetary gears start to turn out of sync with the rest, a sensor detects this motion, and an electric solenoid locks the clutch pack together. After four seconds the solenoid releases, and if the tires slip, the cycle starts again.
What else can I help you with?
Can a 99 Ford Explorer transfer case work in a 97 Ford Explorer?
no
Will my jeep transfer case not work properly if i don't use mopar lube for my nv 247 transfer case?
Yes, the 247 will bind in corners if the proper fluid is not used.
Will a 2003 ford F-150 transfer case work in a 1988 ford bronco?
no
How does the transfer case on a 1990 jeep work are they chain driven or gear?
chain drive
What automatic transmissions will work in a 1993 ford aerostar mini-van?
aerostar 3.0, 4.0 mustang 3.0, 4.0
Dodge ram 4x4 work in low range but not high range?
The problem is most likely in the transfer case or the linkage. The transfer case is bolted to the rear of the transmission on that truck. The linkage could be misadjusted, there should be three distinct positions for the transfer case, Neutral, Low and High. If you suspect the linkage disconnect the linkage and manually put the transfer case in each position and try it to see if it works, if it does it's the linkage if not the problem is in the transfer case itself.
Ford Aerostar 1992 Speedometer not work?
check fuses
How do you remove dodge Dakota transfer case chain?
The Transfer Case chain is located inside of the transfer case. The transfer case is the gearbox located just behind the transmission. It sends power to the front wheels when 4-wheel-drive is selected. To remove the transfer case chain, the transfer case must be removed from the truck, by removing the front and rear drive shafts and unbolting from the transmission (also various connectors for speed sensors, if equipped). The two halves of the transfer case cover housing must be split by removing all the bolts, and several spring clips must be taken off. Unless you have worked on one before, you may want to have the pro's work on this.
Will a np 231 transfer case out of a 2000 jeep wrangler work on a 1999 Jeep Cherokee?
yes
Will a transfer case control module off a 2003 durango work on a 2001 Dakota r?
most definatly
What type of transfer case fluid do you use in a 79 dodge 4x4?
any gear oil or atf will work to
97 gmc truck 4x4 does not work light flashes but does not engage?
it could be your transfer case, my need to be rebuilt.
