After you open the back hatch, you notice two compartments, one on each side of the hatch area, remove the panels to gain access to the bulbs.
yes you have to
http://forums.genvibe.com/zerothread?id=26369
Check the brake fluid...
Pontiac Vibe was created in 2002.
To change the back brakes on a 2004 Pontiac Vibe, start by safely lifting the rear of the vehicle and removing the wheels. Next, remove the caliper bolts and slide the caliper off the brake rotor, then take out the old brake pads. Compress the caliper piston using a brake tool, install the new pads, and reattach the caliper. Finally, replace the wheel, lower the car, and pump the brake pedal to ensure proper function before driving.
To change the center brake light on a 2007 Pontiac Vibe, first, open the rear hatch and locate the access panel on the interior trim near the brake light. Remove the panel by unscrewing or unclipping it, then disconnect the wiring harness from the brake light assembly. Twist the brake light bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble everything by reversing the steps. Ensure the new bulb is securely in place before closing the access panel.
You need to replace the DRL (Daytime running light) Module
where is the internal fuse box on a 2008 pontiac vibe
Changing transmission cables on a 2006 Pontiac vibe
A Pontiac Vibe is a safe venhicle according to Consumer Reviews.
Take tires, rotors and brake pads off. Then get a piece of thick wood and hold it on the rotor and beat it with a hammer to loosin the rotor. Then it will almost fall off in your hand.
where is the plug to drain the oil in a 2005 Pontiac vibe