0
What else can I help you with?
Why would an 81 Chevy truck die when you press the brakes?
The power brake booster is leaking vacuum and that makes the engine die when the brakes are applied. Replace brake booster.
Have an 89 Chevy astro have changed all vacuum lines won't idol?
Did you check the Power Brake booster vacuum hose? Also the booster itself make have a busted diaphragm.
You have changed your brake booster on your 95 Chevy truck and now your brakes wont work nor will it go into gear whats wrong?
It sounds like a vacuum problem. Either you got a bad brake booster or the vacuum line came loose somewhere or cracked when you changed the booster.
How do you vaccum test a brake booster?
To vacuum test a brake booster, first ensure the engine is off and the brake pedal is fully depressed to release any residual pressure. Next, disconnect the vacuum hose from the brake booster and attach a hand-held vacuum pump to the booster’s vacuum port. Apply vacuum using the pump; the gauge should hold steady pressure if the booster is functioning properly. If the vacuum drops significantly, it indicates a leak or failure in the brake booster.
How does the brake vacuum system work on a 1963 Chevy Impala If I push on the brake pedal I hear a hissing sound inside and the car stalls out?
If you have a power brake booster then there will be a vaccum line that runs to the brake booster on the firewall from the carburator. Check the booster for holes and broken fittings or buy a new booster. if no brake booster then brakes shouldn't affect vaccum
Where does the brake booster hose connect?
From the booster, to a vacuum source on the engine.
What can make the brake pedal hard if its not losing vacuum?
Faulty Vacuum Power Brake Booster
What is the vacuum hose diagram for a 1992 Crown Victoria What hose is connected to the brake booster?
you need manifold vacuum for the brake booster.. (intake manifold)
Do you need a vacuum line to brake booster on a non disc brake car?
If you have a booster you need a vacuum line to perform effectively, disc or drum.
How do you replace brake master cylinder an power booster on a 1993 chevy cavalier?
Remove brake lines from master cylinder. Remove the two bolts attaching master cylinder to vacuum booster. remove vacuum hose from vacuum booster. It just pulls out of booster but will give you a little resistence. Remove cover above gas and brake pedals on drivers side floor board. While laying on your back or right arm look up into dash and find and disconnect brake pedal linkage/rod from brake pedal (there is usually a pin with a clip holding this together). Then remove 4 bolts attaching vacuum booster to fire wall. Go back under hood and remove vacuum booster.
Location of vacuum lines on 1995 350 Chevy?
i know one hooks to the brake booster on chevrolet's and toyota's. just follow it from there.
Why does your ipsum stall when you brake?
The power brake vacuum booster is failing.
