where is the starter
You need to replace the starter.
the Oldsmobile Custom Cruiser is based on the same body that the Buick Roadmaster SW and Chevy Caprice SW used, meaning that it has a 5000 lb towing capacity if already equipped with a towing package, and 3500 if not.
Starter solenoid sticking. Replace the solenoid if it is external. If it is internal, then just replace thee starter. It will cost a little more but you will have a new starter and solenoid.
if you mean can a novice replace the starter, the answer is yes. any other repairs to starter just depend on what needs replacing
Remove - battery cable Raise and support vehicle Disconnect the wiring at the top of the starter Remove starter mounting bolts Remove starter
To replace the starter on a 1990 Nissan Stanza, first disconnect the negative battery cable to ensure safety. Then, remove the starter by unbolting it from its mounting bracket and disconnecting the electrical connections. Install the new starter by reversing the removal steps, ensuring all connections are tight. Finally, reconnect the battery and test the new starter to make sure it functions correctly.
this is crazy as hell but,the starter is under the intake manifold directly in the center of the motor.so remove intake manifold and then remove and replace starter.not hard ,just time consuming.
Well it just cost me $375 to have a starter replaced in a 1990 4Runner. But I think I got totally screwed.
I have a 1990 pathfinder and just changed the starter 3 days ago. It was pretty simple but i had to remove the oil filter to get it out and it was still hard to get out.
Remove old one from battery and starter solenoid and replace with new following the same rounting
You start by disconecting the negative - battery terminal. climb undre the car and dixconect the 2 whires going to the starter. Then unbolt the starter from the transmission. replace is the same way, just oppisite. If you don't even know where the starter is than, follow the positive battery cable till it stops. that is the starter.