answersLogoWhite

0

disconnect the cable from the negative terminal on the battery. remove the left side wiper and cowl grill. remove the wiper linkage assembly bolt and nut. remove the wiper link and unplug the electrical connector. remove the motor assembly to chassis bolt, detach the motor from the bracket and lift it from the cowl opening. put the new one in in reverse.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you replace a wiper motor for a 1999 Olds Cutlass?

Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.


How do you replace the wiper motor pulse board on 1999 silverado 2500?

how do you replace the wiper motor pulse board on a 1999 Chevy Silverado 2500


How do you change the wiper motor on a 1999 mountaineer?

To change the wiper motor on a 1999 Mercury Mountaineer, first, disconnect the negative battery terminal to ensure safety. Remove the wiper arms by lifting the caps and unscrewing the nuts, then pull the arms off the splines. Next, take out the interior cowl panel by removing screws and clips, then detach the wiper motor's electrical connector and mounting bolts. Finally, replace the old motor with the new one, reassemble in reverse order, and reconnect the battery.


Where is the wiper pulse module board located on a 1999 GMC Suburban?

it is located on the front of the wiper motor.


How to change the rear wiper motor of 1999 Honda CR-V?

(1) Pull the rear wiper arm cover back to access the wiper arm retaining nut and detach the nut and pull the wiper arm straight off the shaft. (2) Open the rear hatch glass and remove the rear wiper motor cover. (3) Disconnect the electrical connector from the motor. (4) Remove the motor mounting screw and remove the motor. Installation is the reverse of removal.


Install a windshield wiper motor on 1999 Hyundai sonata?

The windshield wiper motor is under the front cowl. After removing the cowl the motor should be easily accessed for replacement.


Will a hatch glass for a 1999 without wiper fit a 1999 with a wiper if you remove the wiper and motor?

If your question is regarding the Ford Windstar, the answer is that the glass is exactly the same size / dimension. Yes, it will fit.


How can you replace a windshield wiper motor in a 1999 Nissan King Cab?

To replace the windshield wiper motor in a 1999 Nissan King Cab, first disconnect the vehicle's battery to ensure safety. Remove the wiper arms by loosening the nuts at their bases, then take off the plastic cover to access the motor. Unbolt the old wiper motor from its mounting, disconnect the wiring harness, and then install the new motor by reversing the process. Finally, reattach the wiper arms, reconnect the battery, and test the new motor to ensure proper operation.


What 10 amp fuse feeds the rear wiper motor?

which fuse feeds the rear wiper for the pathfinder 1999 LE


How do you remove a windshield wiper motor on a 1999 Oldsmobile intrigue?

Take it out with your muscle.


How do you replace a 1999 Dodge Dakota wiper motor?

remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.


Where is the wiper motor for a 1999 Lincoln town car?

The wiper motor for a 1999 Lincoln Town Car is located under the windshield cowl panel on the driver's side. To access it, you'll need to remove the cowl cover and any necessary trim pieces. The motor is typically mounted near the base of the windshield, connected to the wiper linkage.