Fisrt you pull the window and door cranks. Next pull off the door panel.Then remove the screws holding the window channel towards the front of the truck they are located on the bottom of the door.The next step is to remove the 3 screws that hold the small vent window in place they are on the outside edge of the door. Then carefully pull out the entire vent window assembly and channel. This now gives enough room to pull out the window,helps to remove the rear channel also.Install is the reverse
I really don't know.sorry.
This information is listed on a placard on the drivers door post.
Drivers's side, inside, on dash, next to windshield.
The Chevrolet K1500 pickup truck flasher relay switch can be found beneath the drivers side dashboard. The flasher relay switch will be above the brake pedal.
check the inside of the frame rail on the drivers side.
It is mounted under the drivers side of the truck in the frame rail.
it is located on the inside of the frame rail on the drivers side.
That would be the drivers side frame rail under the truck.
What is the gear ratio for a 1985 CHEVROLET K10 pickup
The 1988 Chevrolet S 10 pickup truck driver seatbelt is anchored to the floor of the vehicle. The anchor can be found behind the drivers seat. Remove the seat belt anchor retaining bolts.
i need to find where they hide the horn on my 2006 Chevrolet half ton pickup.
No, a GMC pickup has a higher towing capacity, and is just light years better than a Chevrolet. Overall, buy a GMC!