answersLogoWhite

0

Rear wheel spacers are typically installed between the wheel hub and the wheel itself, ensuring proper alignment and fitment. The spacers should be placed so that they fit snugly against the hub and the wheel, with the wider side facing the wheel in most cases. It's important to ensure that the spacers are installed evenly on both sides of the wheel for balanced handling. Always refer to the manufacturer's guidelines for specific instructions on installation and orientation.

User Avatar

AnswerBot

2mo ago

What else can I help you with?

Related Questions

Will rims off a 2004 suzuki gsxr 1000 fit a 2005 suzuki hayabusa 1300?

No, not just bolt on and go, get the rear spacer from the gsxr wheel and install rear wheel with that spacer and remove te stock one that's on the Busa, then mill .125 off the rear brake caliper hanger so it tightens to the wheel.. as for the front you'll need the gsxr 1000 rotors too, as well as spacers from the gsxr for them to fit a Busa.


Bleeding brakes for a 1984 Pontiac firebird?

start bleeding at the passenger side rear wheel then go to the drivers side rear wheel, next to passenger side front wheel and finally the drivers side front wheel, this is the order you should bleed the brakes.


How you fold down the rear seat of 2011 dodge 1500 quad cab?

In order to fold down the rear seat in a 2011 dodge ram 1500 you have to cut some 5/8 inch spacers out of the material of your choice(wood, metal). These spacers go under the mounts for the seat. Dodge didn't think this one out so well. There is a metal hook on the back of the seat that hooks into the back wall of the cab. With these spacers installed when you fold your seats up, the back of your seat will lift high enough to clear the hook and your rear seat will fold down.


If you turn the steering wheel to the right while in reverse, the rear of the car will?

The rear of the car will always go in the direction that you turned the wheel if you are in reverse. It's just like driving forward. If you want to go forward and right, turn the wheel to the right. If you are in reverse and want the rear of the car to move to the right, then turn the wheel to the right. To answer your question directly, the rear of the car will go to the right.


Can a rear end accident cause the rear wheel bearing to go bad?

no.not if its a car accident


Does the longer break shoe go in fronr or rear on 1977 Chevy pickup rear wheel?

Long shoe goes in the rear


Which direction does arrow go on michelin motorcycle tires?

The "FRONT" arrow indicates the recommended rolling direction for the front wheel and respectively the "REAR" arrow is the direction for the rear wheel.


How do you change rear wheel bearing on Renault kangoo 1.9diesel?

Go to a workshop! :)


Do you install tire cable for Mercedes c300 front tires or rear tires?

It is a Rear Wheel Drive so tire chains go on the rear.


Which way are the threads on the rear drivers side wheel nut go?

The rear wheel nuts are both right-hand thread, and you hold them on with cotter pins. The left-hand thread is on the nut for the front left wheel.


Will a 2.4L engine from a front wheel drive Buick skylark go into a 2002 Chevy S10 rear wheel drive?

no, because you cant put a front wheel drive into a rear drive because of the transmission...it wont mount in


Are front wheel drive mowers better than rear wheel drive?

If you are talking push mowers - Go with a rear wheel drive. On front drive machines when you put pressure on the handles you take weight off of the front wheels and it doesn't want to go very well.