Do you mean the key in ignition chime?
By pushing the button.
If the ignition chime will not turn off on a 1994 Ford tempo the switch for the sound is jammed. The steering column with have to be removed to access the switch for the ignition chime.
Put on your seat belt and buckle it up. The chime will then stop.
To turn off the seatbelt chime in a 2010 Ram 1500, you can follow these steps: Start the vehicle and buckle the driver's seatbelt. Then, unbuckle it and repeat this process three times. After the third time, the chime should stop. If successful, the chime will remain off until the battery is disconnected or the system is reset.
To disable the seatbelt chime on a Ford Taurus, first, buckle the driver's seatbelt and turn the ignition on without starting the engine. Then, unbuckle the seatbelt and buckle it three times within a span of 10 seconds. After the third buckle, you should hear a chime indicating that the feature has been disabled. Turn off the ignition to save the setting.
Maybe the ford escape just doesn't have a tight turning circle at all. Maybe all Ford Escapes are like that.
with your remote
You can go under the driver side of the dash, turn the lights on, listen for the chime to locate it. Once located simply unplug the two wire connector.
press a button
To reset the oil change warning on a 2010 Ford Escape, first turn the ignition to the "On" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn the ignition off and start the engine to ensure the oil change light is reset. If successful, the warning light should no longer be illuminated.
If you connect you seatbelt for about a minute or two, then take it off, it should shut off.
Correct the tire pressure.