The dip stick for the trans. is on the passenger side, between the engine and the firewall. Run the engine to normal operating temp. and pull the stick, wipe it, re-insert it and pull it out. Follow the level marker on the stick. If you need to add, you will need a funnel with a long neck and the proper trans. fluid. Like dexron 3.
It is important to replace old transmission fluid with the right amount of new transmission fluid. The 2005 Ford Crown Victoria has a transmission fluid capacity of 5 quarts.
According to the 2000 Ford Crown Victoria Owner Guide : ( Motorcraft MERCON automatic transmission fluid is used as the power steering fluid )
in the transmission dip stick tube with a funnel
According to the 2002 Ford Crown Victoria Owner Guide : Motorcraft MERCON automatic transmission fluid is used as the power steering fluid
( Motorcraft MERCON-V ) automatic transmission fluid according to the Owner Guide
Trans Dipstick
Rad. needs to be replaced.
my car sometimes it doesn't want run is that transsmision?
Thru the transmission dip stick. use a funnel to get the fluid into the dipstick tube and check to make sure you do not overfill.
Dexron 3, or 4 works just fine.
On a 1991 Ford Crown Victoria : Using a funnel , you add automatic transmission fluid through the ATF fluid level dipstick ( in the engine compartment , near the firewall , on the passenger side of the engine )
Ah, the 1997 Ford Crown Victoria P71 is a wonderful machine. For its transmission fluid, you'll want to use Dexron III/Mercon automatic transmission fluid. Just pour it in gently, like a little stream flowing through a meadow, and your Crown Victoria will purr like a happy little kitten.