5 gallons of gasoline and a match
On a 2004 Ford Explorer : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
Get something for the coolant to go into like a bucket. Remove the lower radiator hose from the radiator and also remove the radiator cap to help and drain into bucket.
how do you remove the tourque convetor botls to flex plate on a 2003 explorer
There isn't one. You have to remove the lower radiator hose, which is a poor design.
remove battery cable
The radiator is at the front of the engine compartment . It connects to the engine with ( 2 ) large rubber hoses , 1 at the top of the radiator and 1 at the bottom of the radiator at the opposite end
On a 2004 Ford Explorer, the radiator is located at the front of the engine compartment, behind the grille, and is part of the cooling system. The radiator cap is typically found on the top of the radiator itself, allowing for coolant access. Ensure the engine is cool before attempting to open the cap to avoid injury from hot coolant or steam.
Most of these do not have one.You must remove the lower radiator hose to drain the radiator.
To remove the radiator from a Ford Explorer Sport Trac, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant by removing the drain plug at the bottom of the radiator, then detach the upper and lower radiator hoses. Next, remove any mounting bolts or brackets securing the radiator, disconnect the transmission cooler lines if equipped, and carefully lift the radiator out of the engine bay. Make sure to dispose of the coolant properly and replace any gaskets or seals when installing a new radiator.
It is at the engine end of the top radiator hose. Drain the radiator into a container and remove the hose at the thermostat housing. Remove the 2 bolts and remove the housing and the thermostat.
Drain plug or petcock at bottom or rear of radiator or Remove lower radiator hose
To remove the radiator from a 2004 Kia Sorento, first ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant by removing the drain plug at the bottom of the radiator. Disconnect the hoses from the radiator, as well as the transmission cooler lines if applicable. Finally, unbolt the radiator from its mounting brackets and carefully lift it out of the engine bay.