answersLogoWhite

0

There are many sending units in that vehicle, need to know which one you are trying to replace.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you install fuel sending unit in 1995 Chevy S10?

how do you replace the fuel sending unit


How do you replace fuel sending unit on 1998 Chevy S10?

The fuel tank has to be removed to gain access to the fuel sending unit. The fuel sending unit and the fuel pump is replaced as a unit.


How do you test the oil pressure sending unit on 1990 4.3 s10?

If you suspect the sending unit may be faulty just replace it with a new one, they are not expensive but a little difficult to remove and replace.


Where is the fuel sending unit on a Chevy S10 Pickup?

In the fuel tank. Fuel tank must be removed to gain access to the sending unit.


Where is the fuel sending unit on a 2001 Chevy S10?

In the fuel tank. The fuel tank needs to be removed to gain access to the sending unit.


Where is the water temp sending unit on 1994 S10?

Next to the thermostat housing.


Why is my 02 S10 V6 hard to start after sitting more than 4 hrs?

check your fuel sending unit...if its loud and noisy you may want to replace it.


Where is the cooling sending unit on a 2000 Chevy s10?

Assuming you mean the engine coolant temperature sending unit, we need to know what engine it has, it makes a difference.


How do you change the fuel pump on a 1996 Chevy blazer s10?

you have to drop the fuel tank and remove the sending unit from the tank and replace fuel pump or wholse sending unit depending on if the pump is sold seperately from the sending unit and as well i suggest you get the book on your vehicle from local parts place because u are dealing with gas and gas vapor


Where is the location of oil sending unit on 1993 s10 chev pickup truck?

With a 4.3L engine, the oil pressure sending unit is in the back of the engine just to the drivers side of the distributor.


Where is the electronic fuel pump located on a 2000 chevey s10?

The fuel pump is located in the fuel tank. From 1995-96 and up you have to replace the entire sending unit, cost is roughly $300.


How do you replace a tbi unit on a 2002 s10 blazer?

A 2002 S10 Blazer doesn't have throttle body injection (tbi).