answersLogoWhite

0

allways add to the overflow bottle not the radiator it is usaly labled on the cap. PS its under the hood

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you flush the radiator on a 2003 Chevy Malibu?

is there a drain plug on the radiator


Where is the radiator cap located on a 2003 Chevy Malibu?

no cap, there is only a cap on over flow coolant tank. to add coolant add to tank make sure it is at the right level when cold.


Where is the coolant temperature sensor located on a 2003 Chevrolet Malibu?

Just above the top radiator hose the leads into the engine.


How much does your 2003 Chevy Malibu weigh?

How mcuch does a 2003 Chevy Malibu weigh?


Can you use refrigerant 134a in a 2003 Chevy Malibu?

YES--now days 134a coolant is used in all systems.


Where is the radiator drain plug on 2003 Chevy Malibu?

the radiator drain plug is on the bottom right facing car from front. you may have to remove the sheild to get at it. my 2000 malibu uses a allen wrench to loosen the drain plug for the radiator. good-day !


How do you program a keyless remote for a 2003 Chevy Malibu?

How program my keyless entry remotes for 2003 chevy malibu


Where Is the radiator on a 2003 Chevy Malibu?

The radiator on a 2003 Chevy Malibu is located at the front of the engine compartment, behind the grille. It is positioned between the front bumper and the engine, typically mounted to the support brackets. To access it, you may need to remove any obstructions, such as the front grille or cooling fans. Always ensure the engine is cool before attempting any work on the radiator.


How do you change the neutral safety switch on a 2003 Chevy Malibu?

how do you check the safety neutral switch on a 2003 Chevy Malibu


How do you change the engine coolant on GM 3.1 Liter 2003 Chevrolet Malibu?

To change the engine coolant on a 2003 Chevrolet Malibu with a 3.1-liter engine, start by ensuring the engine is cool. Locate the radiator drain plug at the bottom of the radiator and place a container underneath to catch the old coolant. Remove the drain plug and allow the coolant to completely drain out. After replacing the drain plug, fill the radiator with a 50/50 mixture of new coolant and distilled water, then run the engine with the heater on to circulate the coolant and ensure there are no air pockets. Finally, check the coolant level and add more if necessary.


Why is the coolant light on when the radiator is full on a 1998 Chevrolet Malibu?

Build up in the radiator system or a plug can cause this. Do a radiator flush (or have a professional do it if you're not interested but it's fairly easy if you read an online HOWTO) to remove the grime and refill with fresh coolant. This solved the problem in my 2003. Check the low coolant level sensor and replace if defective. It is in the side of the radiator.


How to replace the fuel pump on a Chevy Malibu?

How do you change the fuel pump on a 2003 Chevy Malibu?