The high/low pressure lines have valves (1 each) like a tire. You plug a can into each side to recharge. the can will have the fitting and a guage.
Contains no Freon. Freon was banned beginning in 1996.
It contains no Freon. It contains R134a refrigerant and you add it to the low pressure port which is the larger pipe.
To add freon to a 1997 Lincoln Continental, first locate the low-pressure service port on the A/C system, typically found on the larger of the two lines connecting the A/C compressor. Make sure the engine is off, then attach the refrigerant can to the port using the appropriate adapter. Start the engine and turn on the A/C to the maximum setting, then slowly open the valve on the refrigerant can to add freon until the system reaches the proper pressure. Always check for leaks and ensure you’re using the correct type of refrigerant for your vehicle.
I had an additive put in my Lincoln ls. I bought the adapter needed to add freon. It was located on driver side in front of tire.
I have a 1996 land rover 4.0 and need to add freon. I have the gauge, but don't know where to connect it to
You add refrigerant at the low pressure port but you do not add Freon. You add R134/134a. If you are having to add refrigerant then you have a leak that needs to be repaired first.
It contains no Freon. It contains R134a refrigerant and you add it to the low pressure port which is the larger pipe.
Connect guage & 134a freon to low pressure on the evaporator add 1lb at a time
The 1996 Suburban uses r134 Freon. The fittings to add Freon are different sizes on r12 and r134, making it impossible to add the wrong type to your vehicle.
How do you add freon to a 96 Ford Contour
Low pressure line\ Larger hose from the compressor
FreonThe connection is on or close to the receiver dryer. If you add too much, the compressor will lock up or it won't cool very good. They don't sell Freon any longer. By the way, your car takes R134A refrigerant. If you add Freon, you ruin it.