There are two hex-shaped plastic (unfortunately) bolts at the rear of each light assembly. 1 is for vertical and 1 is for horizon adjustments. Can't remember which is which, but I do know that the plastic bolts can snap easily, and can be very difficult to move.
adjusting headlight on transit van
Have this done by a professional. You do not have the equipment to do this correctly.
Get a hammer and tell it to move or else
There are four adjustment screws under the rim that can be tightened or loosened for adjustments of the headlights on 2000 Ford Escort ZX2
When you have the headlights flipped up then you will see 2 holes one on the top and one on the sides. There is a Phillips screw in there that you turn to adjust the headlights.
You have to take the headlights out. To do this, you have to remove the clips on the headlight under the hood. Once removed they are two adjustment screws that you can adjust. It's trial and error.
how do you adjust 2002 Denali headlights
how to adjust headlights on 1992 silverado
How do you adjust headlights on a 2006 Hyundai Sonata v6
To adjust the headlights on a 1993 Ford Ranger, park the vehicle on a level surface about 25 feet away from a wall. Turn on the headlights and mark the center of the light beams on the wall with tape. Using a flathead screwdriver, adjust the vertical and horizontal alignment screws located on the headlight assembly until the top of the beam is at the tape mark and the beams are centered. Repeat for the other headlight to ensure proper alignment.
I've heard that if you have an automatic light switch sut-off switch and are having problem with your headlights flashing like a police car, it was caused by the cars computer.
The headlights on a 1997 Ford Explorer XLT is adjusted using screws behind the lights. One is located on the top and side to allow for full control.