Can't be adjusted -- automatically done (hydraulically). Check the two clutch cylinders, master and slave. If the reservoir at the top is full and the cylinders aren't leaking, sell the car.
how to adjust rear brakes on 1997 tracer merc.
Generally this can be done by adjusting the cable at the handle itself. Probably a nut that needs to be loosened to pull some slack out and re-tighten. However, if it has a lot of slack then the cable is probably shot, or the rear brakes need to be repaired.
You bleed the skave cylinder just like your brakes. Pump a few times hold and open the bleeder valve and repeat.
To adjust the presets on the radio hold down the preset buttons when the selected radio station is on. This will select the chosen radio station as a preset option.
You cannot adjust the tension on this, it has a spring inside of it. If it is weak, it must be replaced.
You can't, the serpentine belt (or fan belt) on a grand marquis is equiped with a self tensioner, if your belt is making noise it either needs to be replaced or one of the pulleys on the cars may be loose and would need to be replaced.
that automatic dont need adjust that automatic dont need adjust
The only thing you can really adjust is the oil level. If it feels like you've got wobble in the steer axle, there's something which needs to be repaired or replaced... you'll have to diagnose to narrow it down.
You adjust idle with idle timing
it has an automatic adjuster on it. with the petal in the up position pull up on the petal and if the adjuster is working it will take the slack out of the cable. if not the adjuster needs to be replaced and this is not a fun job.
1978 80 Mercury Outboard IDLE ADJUSTMENT
No, it's a switch that has to be replaced (common part on a lot of cars). Some cars have more than one so you must specify which sensor you need at the parts supply place.