what yr? i had a 95 and it was located in the rear disc wich had an adjustable spreader to space the gap in or out
To adjust the parking brake on a 1996 Ford Explorer Sport, first, ensure the vehicle is on a level surface and the rear wheels are chocked. Locate the parking brake adjustment nut under the center console or near the rear of the vehicle, depending on the model. Turn the adjustment nut clockwise to tighten the cable until the parking brake holds the vehicle securely when engaged, but not so tight that it drags while driving. Finally, test the parking brake to ensure it holds properly and make further adjustments if necessary.
Disc brakes ( also have rear parking brake shoes )
The parking brake light stay lit on the 1999 Mitsubishi Montero sport the parking brake is working and you have not put the light off.
I née to know to
is that even a full question?
I'm assuming your 1996 Sport is like my 1995 Explorer XLT and has disc brakes front and rear that take brake pads . On the inside of the rear brake rotors is a small set of emergency / parking brake shoes . I know this because I had an emergency brake shoe stick on and was causing a vibration and the wheel to get hot so I had the e-brake shoes changed on both sides and everything re-lubricated etc.
DOT ( 3 ) brake fluid is used for the hydraulic clutch and the brakes in a 1997 Ford Explorer Sport
I found the one on my Explorer Sport Trac hiding I the area just above the parking break release.
How to Install Front Brake Pads Check Related links below.
I Can't find a site that sells a parking brake cable for the yard sport 200.I need advice!
directly above the parking brake release. facing down.
Check your brake fluid level in the brake master cylinder in your engine compartment when it is low your brake warning light will come on