They are not adjustable.
valve or rocker clearence for a 1995 chevy 2.2
To adjust the valves on a 1998 Chevy Cavalier 2.2L, first, ensure the engine is cool and remove the valve cover. Using a feeler gauge, check the clearance between the rocker arms and the valves, as the 2.2L engine uses hydraulic lifters that generally do not require adjustment. If there is excessive noise, it may indicate a need for lifter replacement rather than adjustment. Reassemble the valve cover with a new gasket to prevent leaks and ensure everything is properly torqued.
The torque specification for the rocker arm nut on a 1997 Chevy Cavalier is 22 foot pounds. This is the equivalent of 30 newton meters.
There are no adjustments on a stock Pontiac valvetrain. You simply torque them to 20 ft lbs. Pontiac did not use locking rocker arm nuts. Any attempt to adjust them like you do a Chevy will result in the rocker nuts backing off.
for each cylinder put the cam lobes down, take the slack out of the rocker by tightening the rocker nut. When the slack is out, turn it 1.5 to 2 turns. That's it.
First, open the hood to reveal the car's engine compartment. Then find the right fitting to adjust the rocker arms. Use the tool to adjust the rock arms to desired area.
To adjust the valves on a 1998 1.3L Chevy Metro, first ensure the engine is cold and remove the valve cover. Rotate the engine to align the timing mark at TDC on the compression stroke for cylinder 1. Using a feeler gauge, check the clearance between the rocker arm and the valve stem, adjusting the nut on the rocker arm as necessary to achieve the specified clearance. Repeat this process for all valves, then reassemble the valve cover and ensure all components are securely fastened.
do you mean cavalier hand brake?
If it has hydraulic lifters, you do not adjust the valves.
Rocker Studs 50 lb/ft
They are not adjustable.
A tune up consists of changing the fuel filter, air filter, spark plugs, spark plug wire and adjust any valves. The average cost for a tune up for a Chevy Cavalier would be between $100 to $150 depending on the cost of labor.