Generally every spark plug has designated gap and to measure the same, a gauge made out of alloy wire is available. The gap between two terminals (one as bent strip and the other is a stud) of the spark plug is adjusted using the wire gauge.
with a spark plug gap tool buy one for 3 bucks at auto parts store
A spark plug gapper. Avalible at any autoparts store
.30 Just get a spark plug gapper to see what your gap is and adjust accordingly
The actual spark plug gap should be listed on the emissions sticker on your hood. You would remove the spark plug, and use a feeler guage, or a spark plug gap tool to the gap specified on your emissions sticker. You would increase, or decrease the gap between the center electrode and the end of the plug. Hope this helps. mudmanben
To use a spark plug gap tool, first remove the spark plug from the engine and clean it if necessary. Insert the spark plug into the tool, aligning the gap between the center and ground electrode with the gauge. Adjust the gap by gently bending the ground electrode with the tool until it matches the manufacturer's specifications. Finally, recheck the gap to ensure accuracy before reinstalling the spark plug.
The spark plug gap is 09.96 The spark plug gap is 09.96
since its using he iridium type so no need to adjust the gap.
spark plug gap for a 2.2l is 0.060"
.045 spark plug gap
The spark plug gap setting for Autolite 458 spark plugs is typically around 0.040 inches (1.01 mm). However, it's essential to check your vehicle's specifications, as some engines may require a different gap setting for optimal performance. Always adjust the gap carefully using a spark plug gap tool to ensure proper ignition.
0.32 gap spark plug
The spark plug gap is .054"