The cam sensor is not adjustable.
No, it is computer controlled.
The power steering is not adjustable.
Idle speed is computer controlled and is not adjustable.
To set the clock on a 1999 Chrysler Sebring Convertible, turn the ignition to the "ON" position without starting the engine. Press the "CLOCK" button on the radio or dashboard, and then use the "H" (hour) and "M" (minute) buttons to adjust the time. Once set, press the "CLOCK" button again to save the changes.
The throttle position sensor is not adjustable on a Chrysler 3.0L .
u need to use a volt meter and set t.p.sensor and adjust the cable unless u can flash comp.
You have to set your camshaft at a position of firing at number piston ,that is if the camshaft gear does not have a visible timing marks and in relationship with the crankshaft position it has to be position number one piston at TDC
The 1997 Chrysler Sebring parking brake cable has adjustment nuts on each end of the cable. Adjusting the nuts will lengthen or shorten the parking brake cable.
You will have to find the bent or broken part and replace it.
Idle speed is computer controlled and is not adjustable.Idle speed is computer controlled and is not adjustable.
pop the hood. above the headlights there is a "hole" more toward the fender with a plastic gear looking thing it turns to adjust the lamps. this is on a 97 but up to 2002 is pretty much the same.
Camshaft Sensor is used to adjust the timing to to belt stretch