the idle is set by the comp so u need some sort of programmer
Driver error.
== ==
800 RPMS....Newb.
between 500/750 depends on where the idle screw is set
The idle speed on a 1987 Chevy Celebrity is controlled by the engine computer, there is no way provided to adjust it.
Idle control sensor on the driver side strut tower. The cover should be blue.
there is a screw on the carb right where the throttle cable hooks to it that you use to adjust the idle.
The idle is control by the idle air control motor from outputs from the Engine Control Module.
Actually, it should be don e with a vacuum gauge, to maximum vaccuum. Without one, adjust the idle mixture to max., idle.
You can not adjust the idle screw, it is sealed off at the factory. If you are having a high idle problem check for a vacuum leak or a bad idle air control valve. These will commonly cause a high idle.
Idle speed is controled by the computer, therefore non adjustable.
The idle speed is computer controlled on a LT1 engine. If it is a little high, try checking for vacuum leaks.