It should have a bleeder screw on top of the thermostat housing.
To change the thermostat in a 2001 Oldsmobile Silhouette, first ensure the engine is cool and disconnect the negative battery cable. Drain the cooling system by removing the radiator cap and opening the drain valve. Then, locate the thermostat housing, remove the bolts, and take off the housing to access the thermostat. Replace the old thermostat with a new one, ensuring the gasket is properly seated, reassemble the housing, refill the cooling system, and reconnect the battery.
The 1987 Oldsmobile Cutlass cooling system has a fluid capacity of 5.5 gallons. The cooling system fluid should consist of 50 percent antifreeze.
The 1995 Oldsmobile Aurora cooling system temperature sensor can be found on the front of the engine. The sensor will be above the thermostat housing.
Yes, both cooling fans on a 2002 Oldsmobile Silhouette are designed to run at the same time under certain conditions, such as when the engine reaches a specific temperature or when the air conditioning system is engaged. The fans work together to help maintain optimal engine temperature and provide adequate airflow through the radiator. If one fan is not operating, it can lead to overheating or reduced cooling efficiency. Always check the fuses, relays, and wiring if there are issues with the fans.
how to dis arm a theft system on a 1998 oldsmoble or how to rest it
jacket cooling system is a that the part of the engine were
The cooling system.
3100 v6
Motor cooling system? The engine cooling system consits of the water pump, radiator, hoses, cooling fans, etc.Motor cooling system? The engine cooling system consits of the water pump, radiator, hoses, cooling fans, etc.
This is only one of a number of unrelated possible answers, but: make sure your cooling system is full and pressurized (ie., buy a new radiator cap). If filling the radiator and replacing the cap doesn't work, its probably something completely different, possibly very major engine trouble.
Engine cooling system is not a closed system you can't remove the air.
To burp the cooling system on a 2001 Oldsmobile Aurora, first ensure the engine is cool, then remove the radiator cap. Start the engine and let it idle while allowing the coolant to circulate. As the engine warms up, check for air bubbles; you may need to add coolant to the reservoir as it drops. Once the air bubbles stop and the coolant level is stable, replace the radiator cap securely.