0
You need a helper. Have someone depress pedal & hold. While pedal still down, crack open bleeder (top, behind backing plate) to allow air to escape, then tighten. Have helper release pedal & repeat until you hit fluid. Periodically check reservoir & add if needed. it helps to have some vac tubing that fits bleeder (clear) so you bleed off into container. If you can make it to a shop, most only charge 40.00 or so for a bleed.
What else can I help you with?
Show how to change the thermostat in a 2000 Mercury Sable?
mercury sable
Where is the starter for a 2000 Mercury Sable?
The 2000 Mercury Sable starter can be found on the right hand side of the engine. The starter will be near the back of the engine.
How do you replace the air brakes on a 2000 Mercury Mountaineer?
The Mercury Mountaineer has hydraulic brakes, not air brakes.
Where is the horn located on a 1994 Mercury Sable?
on the steer wheel
How many bolts in 2000 Mercury Sable starter?
The 2000 Mercury Sable starter will have three retaining bolts. There will be two cable retaining nuts on the front of the starter.
When i press on the brake pedal of my 2000 mercury mystique the pedal gos to floor after doing brakes?
It sounds like you need to bleed the system of air.
Where is the number 1 cylinder location on a 2000 Mercury Sable?
On a 2000 Mercury sable : firewall 1-----2-----3 4-----5-----6 front of vehicle > driver
What is the rocker torque specs for 3.0 12v mercury sable?
torque specs 2000 mercury sable 3.0 12V rod bolts
Where is the 2000 sable radiator cap?
In a 2000 Mercury Sable : The thread on cap on the engine coolant reservoir is the pressure cap / radiator cap
If I remove the security fuse from a 2000 mercury sable will it stll start?
no it will not
Is there a thermostat on a 2000 Mercury Sable LS?
There is a thermostat on all cars.
Where is the number 3 plig located on a 2000 Mercury Sable?
firewall 1-----2-----3 4-----5-----6 front of Mercury Sable > driver
