0
Easiest wasyis to build a regular speaker box built to the speakers specifications, and cut a hole in the box where ever you want the plexigalss. to install it you need to cut a small grove along the hole you cut earliers so that the plexiglass can sit even with the rest of the box. after that carefully place clear silicone on the surface you will place the plexiglass on and stick the piece on. pre drill holes so you can place small srews in it for added structure.
What else can I help you with?
What is a Plexiglas box?
A plexiglas box is a light transparent weather resistant thermoplastic container.
What is the best Bass andamp combination for me if i want to blast hip-hop in my car with a deep bass?
Its not the speaker or amp as much as it is the speaker enclosure. If your looking for ground pounding bass a band pass box is what you would want with 2 12" subs. A band-pass box are the one's with Plexiglas front on them.
What are acrylic lecterns?
A lectern is a podium-like stand used by a lecturer or speaker. Acrylic is a material commonly known as plexiglas. An acrylic lectern is thus a podium-like stand made from plexiglas.
What are the ratings and certificates for Speaker's Box - 2004?
Speaker's Box - 2004 is rated/received certificates of: USA:TV-PG
Good titles to see if a speaker is louder inside or outside a box with soundwaves?
How about this: What's inside the box? How Sound Wave Intensity changes in a speaker box to outside.
What is the density of plexiglas?
The density of plexiglas is rho = 1,190 kg/m³ or rho = 1.19 g/cm3.
What are the advantages of Plexiglas compared to that of normal glass?
The advantages of Plexiglas compared to that of normal glass are first that Plexiglas cost a fraction of the price, second it is very durable and wont shatter like glass.
Who has the trademark on Plexiglas?
Plexiglas was registered in 1935 by Delaware company Rohm & Haas, and appears to be owned by a French company called Arkema. The most recent related registration, for Plexiglas Edge FX in 2005, was by Arkema directly.
How do you build a bass speaker?
Purchase a subwoofer speaker (also known as a component subwoofer). The component subwoofer is the actual speaker you'll be mounting into the enclosure you build. Crutchfield.com is an excellent resource for reviewing and purchasing component subwoofers
How do you make a talk box?
I have made a talk box before. What you need is some surgical tubing, a high current dual pole single throw switch, a small - high powered- speaker and a small sealable box to fit it in. You will also need an amplifier that has the speaker output that you can use. You need to mount the speaker and the switch into the box - wiring the speaker so when you push the switch, it will route the signal to the speaker in the box or back to the speaker from the amplifier. Make sure that the box has a hole in it that you can attach the surgical tubing that is on the same side as the front of the speaker. Attach the tubing to the box. If you want, there are plumbing fitings that you can buy from your local hardware store that will allow you to remove the tubing from the box. Then seal it all up. You can use silicone for that. run the surgical tubing from the box to the microphone that you are using. The sound will travel through the surgical tubing and into your mouth and then through the microphone.
Can you use a squeegee on plexiglas?
Yes
What do you use to tint plexiglas?
Paint
