Hi: Ive changed the oxygen sensor in the back , located in the exhaust manifold. You'll have to purchase an oxygen sensor socket so you can get the socket down over the wire coming out of the oxygen sensor.This socket has a slit in one side so the sensor wire can fit through. Turn it counter clockwise and its out. Be sure to use some antiseize compound suitable for oxygen sensors when installing the new sensor. All of the above items can be bought at your parts store.
There are two o2 sensors on this car.
All O2 sensors all threaded into the exhaust system at various points.
All O2 sensors are threaded into the exhaust system at various points.
All O2 sensors are screwed into the exhaust system.
two
the o2 oxygen sencor is under the passenger side under the turbogharger
should have 4
The 2000 Grand did not use the 318. The O2 sensors are in the exhaust on either side of the catalytic onverter.
The 2000 Dodge Intrepid with a 3.2L engine is equipped with a total of four oxygen (O2) sensors. There are two upstream (pre-catalytic converter) sensors and two downstream (post-catalytic converter) sensors. These sensors help monitor the engine's air-fuel mixture and emissions performance.
The 2000 Cadillac DeVille typically has four oxygen (O2) sensors. There are two upstream (pre-catalytic converter) sensors and two downstream (post-catalytic converter) sensors for each of the vehicle's two catalytic converters. These sensors help monitor the exhaust gases to ensure optimal engine performance and emissions control.
Bank 1 is on the passenger side. Bank 2 is on the drivers side. The O2 sensors are screwed into the exhaust system. Follow the exhaust manifold rearward and you will find the O2 sensors.
33 ft/lbs or 45 Nm