You need to actually buy a complete lower control arm. The BJ isn't removable. A few tools and about an hour to change in your driveway. Need more help let me know
You will need to remove the tire and wheel. Remove the nut from the top of the ball joint. Pound the ball joint out with a hammer. Reverse the process to install the new ball joint.
you have to use a press to pop out the ball joint, you might consider removing your a arm and bring it to a shop with press so that you can have your new ball bearing pressed
To install a ball joint in a Hyundai Elantra, first lift the vehicle and remove the wheel for access. Then, detach the lower control arm by removing the bolts holding the ball joint in place. Replace the old ball joint with the new one, ensuring it’s properly seated, and reattach the control arm and tighten the bolts to the manufacturer’s specifications. Finally, reassemble the wheel and lower the vehicle.
To change a lower ball joint that is pressed in, you need to use a ball joint press tool to remove the old joint from the control arm. First, detach any components securing the ball joint to the control arm. Next, position the ball joint press tool over the joint and apply pressure to push it out. Finally, install the new ball joint by pressing it in using the same tool.
How to change the lower ball joint for Mitsubishi diamante 1994
You can not just change the ball joint , you have to replace the whole lower control arm with ball joint.
Begin by removing the tire and wheel from your Kia. Remove the ball joint retaining nuts. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
It's not always necessary to change the lower ball joint when replacing the upper ball joint. However, it's recommended to inspect the lower ball joint for any signs of wear or damage while working on the upper ball joint. If the lower ball joint shows signs of wear, it may be a good idea to replace it to ensure optimal performance and safety.
Remove the tire and wheel from your 1996 Mercury Grand Marquis. Remove the ball joint retaining nuts. Pound the ball joint out with a hammer. Reverse the process to install your new ball joint.
A 2004 Chrysler Town and Country does not have an upper ball joint.
The ball joints can be replaced by removing the wheel. Remove the rotor and brakes. Pound the old ball joint out. Insert the new ball joint with a ball joint compressor.
7879blueovalbronco.com