you will have to get it to a shop as they will have to compress the coil spring to take the pressure of it, then it is just a matter of one nut holding the wheel and two holding it at the bracket on the frame.
Its is connected to the bottom of the steering box and steers your vehicle.
replace a control arm 99 tarus
They are not if you have a press...
u change it
To change the upper control arm on a 1994 Lincoln Mark VIII, start by safely lifting the vehicle and removing the front wheel. Next, disconnect the upper control arm from the steering knuckle by removing the bolts and separating it from the knuckle. Then, remove the bolts securing the upper control arm to the chassis and take out the old control arm. Install the new control arm by reversing the removal steps, ensuring all bolts are torqued to the manufacturer’s specifications.
go to a mechanic
There should be two cams on each upper control arm. Look at it and see how each will cam will affect both camber and caster. To change caster, move cams of control arm in opposite direction the same amount. To change camber, turn both cams an equal amount in the same direction. Either way, readjust toe when done as it will have changed.
how do you replace wiper crank arm 2001 chevrolet impala?
To change the lower control arm on a Hyundai XG350L, begin by safely lifting the vehicle and removing the front wheel. Next, disconnect the control arm from the steering knuckle and the frame by removing the necessary bolts and nuts. Once the old control arm is removed, position the new control arm in place and secure it with the bolts. Finally, reattach the wheel, lower the vehicle, and ensure everything is tightened to the manufacturer's specifications.
I have 2000 expedition and thought i could change then. After taking my wheel off i notice they could not be change. You need to replace the upper control arm.
To change the lower control arm on a 2001 Sport Trac, first, safely lift the vehicle and remove the wheel. Then, disconnect the lower ball joint, the sway bar link, and any other necessary components to free the control arm. Remove the bolts securing the control arm to the frame, and then replace it with the new control arm. Finally, reassemble all components in reverse order and ensure everything is tightened to the manufacturer’s specifications.
To change the wiper blades on a 1988 Chevrolet Celebrity, first lift the wiper arm away from the windshield. Press the release tab on the old wiper blade, then slide it off the arm. Align the new wiper blade with the arm, ensuring it locks into place, and gently lower the wiper arm back onto the windshield. Repeat the process for the other wiper blade if needed.