It will be easier to remove the old bulb and to install the new bulb correctly if you first remove the car's battery. To do so, it is not necessary to disconnect the battery cables, but you must loosen the battery hold down screws. All you need then to do is push the battery aside a bit to provide you sufficient access to the rear of the lamp assembly.
I have been passed by too many oncoming cars that have had the driver's side bulb incorrectly installed. Without reasonable access, it is difficult with many car models to secure the new bulb properly and this results in a driver's side headlight that fails to direct the illumination correctly. Often giving you little help at night and perhaps blinding oncoming drivers.
look behind drivers side head light it mightbe there mounted to the frame
Have a look at this link: http://www.wikihow.com/Replace-a-Tail-Light-on-a-Dodge-Grand-Caravan
On fuse panel under dash to left of steering column.
yes
To reset the change oil light on a 2013 Dodge Grand Caravan, first turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within 10 seconds. After doing this, the oil change light should turn off. If it doesn't reset, repeat the process to ensure it was done correctly.
Change your fuel pump unit(its in the tank).
See sources and related links below to lookup Dodge Caravan brake light lamp part numbers by vehicle year.
From outside,take a screws out to get light assembly loose and remove light socket from back of assembly and channge your light bulb,then put it back.
The map light on a 2004 Dodge Grand Caravan SXT is changed gently prying the edge of the cover to reveal the bulb. The bulb can then be popped out and a new bulb installed.
after the 96 model year dodge quit using them
Very Carefully. For all the directions look at your owners manual it's really easy.
Light Cypress Green Metallic is the exterior color code "PG2" for a 1999-2000 Dodge Caravan.