You have to reach up under the dash with your hand and push the spring loaded button located on the switch. This will release the headlight knob and let you pull it all the way out. Now you can unscrew the retaining nut outside the dash that holds the switch in place. Now you can lower the switch down to where you can disconnect the electrical plug. If you already have the new switch you can notice the location of the spring loaded button to help you find it on the original switch.
It is quite simple to change the brake light switch on your 1998 Chevy S 10 pickup truck. The brake light switch simply plugs in and out.
To change the brake light switch on a 1998 Chevy Cheyenne pickup, first, disconnect the negative battery terminal to prevent electrical shorts. Locate the brake light switch mounted on the brake pedal assembly, usually near the top of the pedal. Remove the electrical connector from the switch, then unbolt and remove the old switch. Install the new switch in the same position, reconnect the electrical connector, and test the brake lights before reattaching the battery terminal.
how to change brake light switch in a 2007 chevy colorado
change the brake light switch
Usually located on the transmission.
It is located just above the brake pedal pad.
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
there may be a recall for this - the polarity may be incorrect - call your dealer to see if this vehicle has an outstanding recall
Changing the brake light relay switch on your 1999 Chevy Cavalier is quite easy. The brake light switch simply plugs in and out.
You may have a blown fuse or a defective brake light switch.
Standard or automatic transmission, they both are mounted to the transmission.
Check the fuse, check the bulbs, then check the brake light switch.